Application

• water
• steam
• oils
• fuels
• salt solutions
• natural gas
• propane–butane

Oil-resistant sealing plate designed for use in high-temperature and high-pressure conditions. Recommended for use in subsea installations.

Material

The GAMBIT AF-OIL sealing sheet is manufactured from:

• KEVLAR® aramid fibres
• mineral fibres
• fillers

All components are bound together by an NBR rubber-based binder, which ensures good chemical resistance and stable mechanical properties.

Technical data

• designation according to DIN 28091-2: FA-AM1-O
• maximum working pressure: 10 MPa
• Continuous operating temperature: –60°C to +300°C
• short-term operating temperature: up to +350°C
• Continuous operating temperature in steam: up to +230°C
• Colour: green

Dimensions

Standard sheet thicknesses:

• 0.3 / 0.5 / 0.8 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 4.0 / 5.0 mm

Thicknesses exceeding 5.0 mm are manufactured as laminated sheets.

Standard sheet size:

• 1500 × 1500 mm

Sheets up to 1500 × 3000 mm can be produced by arrangement.

Physico-chemical properties

• density: approx. 2.0 g/cm³
• tensile strength (min.): 9 MPa
• compressibility: 5–15 %
• elastic recovery (min.): 55 %
• residual stresses 50 MPa / 16 h / 300°C (min.): 29 MPa
• residual stress at 50 MPa / 16 h / 175°C (min.): 35 MPa
• Thickness gain – IRM 903 oil (150°C / 5 h): max 6 %
• Thickness gain – reference fuel B (20°C / 5 h): max 6 %

Approvals and certificates

• DVGW
• BAM
• TA Luft (VDI 2200)
• UDT
• DNV GL