Throttle position sensor limiter 4.2 TDI – Fault P2015

Application:

Audi

A8 D3 (4E2, 4E8)
        4.2 TDI quattro (BMC) 4,134 cc 320 KM/235 kW Jan. 2005–June
2005 4.2 TDI quattro (BVN) 4,134 cc 326 KM/240 kW July 2005–July

2010 A8 D4 (4H2, 4H8, 4HC, 4HL)
        4.2 TDI quattro (CDSB) 4,134 cc 351 KM/258 kW 2009/11–2014/04
4.2 TDI quattro (CTEC) 4,134 cc 385 KM/283 kW 2013/10–2018/01

Q7 (4LB)
4.2 TDI quattro (BTR) 4,134 cc 326 KM/240 kW 2007/03–2009/06
4.2 TDI quattro (CCFA CCFC) 4,134 cc 340 KM/250 kW May 2009–August

2015 Q7 Van (4LB)
4.2 TDI quattro (BTR) 4,134 cc 326 KM/240 kW Mar 2007–Jun
2009 4.2 TDI quattro (CCFA CCFC) 4,134 cc 340 KM/250 kW Mar 2007–Aug


2015 Porsche

CAYENNE (92A)
        4.2 S Diesel (MCU.DB) 4,134 cc 382 KM/281 kW Oct. 2012–
4.2 S Diesel (MCU.DC) 4,134 cc 385 KM/283 kW Oct. 2014–


Volkswagen

TOUAREG (7P5, 7P6)
        4.2 V8 TDI (CKDA) 4,134 cc 340 KM/250 kW Jan 2010–Mar 2018

Adjuster

numbers compatible with these limiters:

    059129086J
059129086L
059129086G
059129086K
059129086
059129086D
059129086M
059129086E

Important Information

This universal
kit is compatible with throttle body regulators featuring 5-pin and 4-pin connectors

. The kit includes two pieces (left and right sides) made of acid-resistant steel.

The kit is designed for vehicles affected by error code P2015 (throttle body regulator error) or 008213 (intake manifold throttle position sensor).

These codes most often indicate damage to the plastic stopper located on the throttle shaft, which is controlled by the actuator.

This kit allows you to avoid replacing the manifold with a new one. After installing the stops, simply clear the error codes or wait for them to clear automatically after driving a few hundred kilometers (sometimes starting the engine a few times is enough). There is no need to remove the intake manifold to install the stops.

The restrictors are mounted to the original flow control valves, and the entire operation takes no more than 30–40 minutes. For more information and installation instructions, see YouTube (just search for P2015).

Technical
Specifications:

plug material: stainless


steel Aditech Sp. z o.o. assumes no liability for the use of this part on public roads. It is the customer’s responsibility to ensure compliance with the rules and regulations applicable in their home country. For use in motorsports off public roads.