GARDENA
There are 6 products.
Popular Parts and Accessories
The products most frequently chosen by our customers
If your robotic mower slips on wet grass, spins its wheels in place, or leaves uncut strips on a slope, the cause usually lies in the wheels’ traction, not in the mowing schedule. Well-chosen Gardena replacement parts from this category improve the wheels’ contact with the ground and stabilize the robot’s movement. Although the section’s name includes parts for lawn mowers and trimmers, the items shown here are designed for Gardena robotic mowers.
Read more
What Gardena replacement parts will you find in this category?
This section features six items belonging to two types of components responsible for the robotic mower’s traction: spikes and spiked wheels. The entire group is made of the same material: 3 mm-thick stainless steel. These parts are compatible with three model families: Live and Sileno City, Minimo, and R38Li, R40Li, R50Li, R70Li, and R80Li. Compatibility with a specific series ensures proper installation without any modifications.
What should you look for when choosing spikes or wheels?
Spikes work well when the wheels are mechanically sound and the robot loses traction mainly after rain, on compacted turf, or when starting uphill. Spiked wheels are worth considering when wear affects the entire drive component or when you want to immediately improve driving stability. In practice, the choice is simplified by four criteria:
- exact compatibility with the model family
- surface type, ranging from soft soil to a damp lawn
- extent of wear—that is, whether the problem concerns only traction or also a worn wheel
- material and stiffness, since 3 mm-thick stainless steel withstands loads better than thinner components
The price difference between individual studs and complete wheels stems mainly from the scope of replacement. This is important when planning maintenance. In a small, level garden, improving traction is usually sufficient. With frequent turns, ruts, and longer inclines, it makes more sense to consider complete wheels.
Why do Gardena parts wear out, and how can you check for compatibility?
Traction components wear out due to abrasion, sand, wet grass, and repeated turning in place. Genuine Gardena replacement parts are selected based on compatibility with a specific model and factory specifications, but a well-made aftermarket replacement can perform just as effectively if it has the correct geometry, is made of the right material, and has the proper thickness. The advantage of parts that meet the specifications lies in predictable installation, the absence of play, and even power transmission, while a thickness of 3 mm helps maintain rigidity under load. Before making a choice, it’s best to start by identifying the robot model and only then decide whether individual spikes or complete wheels would be better.
FAQ
1. How can you tell if mowing problems are caused by a lack of wheel traction?
Slipping on wet grass, spinning in place, and uncut swaths on slopes are typical symptoms mentioned in the article. If the wheels look mechanically sound, the problem is most likely related to traction.
2. Is it safe to use aftermarket parts instead of original Gardena parts?
Yes—a well-made replacement part can work just as effectively, as long as it has the correct geometry, material, and thickness. Original parts, on the other hand, ensure predictable installation and no play.
3. Why are the thickness and material of the spikes and wheels important?
The material and thickness affect stiffness and abrasion resistance. 3-mm-thick stainless steel better withstands loads and sand, which translates to a longer service life and more stable operation of the robot.