Application

• Volkswagen Touareg I (7L) 2.5 R5 TDI BPE 174KM/128kW 2006–2010
• Volkswagen Touareg I (7L) 2.5 R5 TDI BDP 163KM/120kW 2006–2010
• Volkswagen Crafter I (2E) Bus 2.5 R5 TDI BJJ CEBA 88KM/65kW 2006–2016
• Volkswagen Crafter I (2E) Bus 2.5 R5 TDI BJK CEBB 109 KM/80 kW 2006–2016
• Volkswagen Crafter I (2E) Bus 2.5 R5 TDI BJL CECA 136KM/100kW 2006–2016
• Volkswagen Crafter I (2E) Bus 2.5 R5 TDI BJM CECB 163KM/120kW 2006–2016
• Volkswagen Crafter I (2E) Van 2.5 R5 TDI BJJ CEBA 88KM/65kW 2006–2016
• Volkswagen Crafter I (2E) Van 2.5 R5 TDI BJK CEBB 109KM/80kW 2006–2016
• Volkswagen Crafter I (2E) Van 2.5 R5 TDI BJL CECA 136KM/100kW 2006–2016
• Volkswagen Crafter I (2E) Van 2.5 R5 TDI BJM CECB 163KM/120kW 2006–2016
• Volkswagen Crafter I (2F) Platform / Chassis 2.5 R5 TDI BJJ CEBA 88KM/65kW 2006–2016
• Volkswagen Crafter I (2F) Platform / Chassis 2.5 R5 TDI BJK CEBB 109KM/80kW 2006–2016
• Volkswagen Crafter I (2F) Platform / Chassis 2.5 R5 TDI BJL CECA 136KM/100kW 2006–2016
• Volkswagen Crafter I (2F) Platform / Chassis 2.5 R5 TDI BJM CECB 163KM/120kW 2006–2016
• Volkswagen Transporter V (T5) 2.5 R5 TDI BNZ 131KM/96kW 2006–2010
• Volkswagen Transporter V (T5) 2.5 R5 TDI BPC 174 KM/128 kW 2006–2010
• Volkswagen Multivan V (T5) 2.5 R5 TDI BNZ 131KM/96kW 2006–2010
• Volkswagen Multivan V (T5) 2.5 R5 TDI BPC 174KM/128kW 2006–2010

Engine displacement: 2.5 TDI (2461 cm³)

This kit is compatible with models featuring exhaust coolers with part number: 076 131 512 E

The vehicles listed above may have had other types of exhaust coolers. Please check carefully before purchasing parts.

Replaces OEM parts with the following numbers

• 076131501B
• 076131501A
• 076131512F
• 076131525D
• 076131525C
• 076131184G
• 7.00823.06.0

Benefits of installing the EGR system removal and exhaust cooler removal kit

• Reduced contamination in the intake system—no backflow of exhaust gases means a cleaner intake manifold and less carbon buildup and deposits.
• More stable engine operation—less idle speed fluctuation, better throttle response.
• Improved performance and dynamics—the absence of hot exhaust gases in the intake improves air-fuel mixture quality and combustion efficiency.
• Eliminated risk of EGR system failures—removes the source of malfunctions (stuck valve, damaged actuator, controller errors).
• Reduced exhaust smoke – in many cases, combustion becomes more complete.
• Extended engine oil life – less soot entering the oil via blow-by.
• Possible reduction in fuel consumption—in some engines.
• Lower intake temperatures—which can have a beneficial effect on the turbocharger and intercooler.

Technical Specifications

• Plug material: acid-resistant steel, powder-coated
• Note: This kit is intended for use when removing or plugging the exhaust gas recirculation (EGR) valve.