Set of 4 x 22 mm BMW intake manifold plugs with Viton O-rings, including a set of intake manifold gaskets

Application:

M47N / M47TU / M47TUD20 110 kW (148 KM), 330 Nm

E46 320d/318d (2001–2005)
    E83 X3 2.0d (through the end of 2006)

M47TU2D20 (from 2004) 120 kW (161 KM), 340 Nm

E60/E61 520d
E87 120d
E90/E91 320d
E83 X3 2.0d (from 2006)



Information:

    Manifold plugs with an original German Viton O-ring, resistant to oil and both high and low temperatures.
Plugs made of PA66 GF35 plastic—the same material as the manifold and swirl
flaps Perfect dimensional consistency.
    Polish product.

Kit contents:

Manifold gaskets (manufacturer of your choice): 4 pcs. item 2 + 4 pcs. item 3
EGR valve gasket (manufacturer of your choice): 1 pc. item 4
Manifold plugs: 4 pcs. with a Viton O-ring, resistant to oils and high and low temperatures
Illustrated installation manual—available for download in the Attachments tab.

There are two sizes of plugs

: - larger plugs (33 mm) designed for cars manufactured from 2004 onward
- smaller ones (22 mm—available in another listing) designed for cars manufactured before 2004.

In 2004 and early 2005, two types of swirl flaps were installed in 6-cylinder engines; please check before purchasing.

Technical

Specifications:

Manifold plugs with an original German Viton O-ring, resistant to oil and both high and low temperatures.
Plugs made of PA66 GF35 plastic—the same material as the manifold and swirl
flaps. Perfect dimensional consistency.
    Polish product.

Aditech Sp. z o.o. assumes no liability for the use of this part on public roads where the removal of emission control devices is prohibited. It is the customer’s responsibility to ensure compliance with the rules and regulations applicable in their home country. For use in motorsports off public roads.