Set of 6 x 33 mm BMW intake manifold plugs with Viton O-rings, including a set of intake manifold gaskets

These plugs are designed for BMW M57 6-cylinder diesel engines:

M57 / M57D25 (since 2000) 122 kW (164 KM), 350 Nm

E39 525d (2000–2003) applies only to models with an

automatic transmission M57N / M57TU / M57TUD25 (from 2004) 177 KM (130 kW; 175 KM), 400 Nm

E60 / E61 525d

M57 / M57D30 (from 1998) 184 KM (135 kW; 181 KM), 390 Nm

E39 530d applies only to models with automatic transmission
E46 330d / 330xd applies only to models with automatic transmission

M57 / M57D30 (since 1998) 184 KM (135 kW; 181 KM), 410 Nm

E38 730d applies only to models with an automatic transmission
E53 X5 3.0d

M57 / M57D30 (from 1998) 193 KM (142 kW; 190 KM), 410 Nm

E38 730d
E39 530d

M57N / M57TU / M57TUD30 (from 2002) 204 KM (150 kW; 201 KM), 410 Nm

E46 330d / 330Cd / 330xd
E83 X3 3.0d

M57N / M57TU / M57TUD30 (since 2002) 218 KM (160 kW; 215 KM), 500 Nm

E53 X5 3.0d
E60 / E61 530d / 530xd
E65 730d

M57N / M57TU / M57TUD30 (since 2002) 272 KM (200 kW; 268 KM), 560 Nm

E60 / E61 535d

M57N / M57TU / M57TUD30 (since 2002) 231 KM (170 kW; 228 KM), 500 Nm

E90 / E90LCI / E91 / E91LCI / E92 / E93 335d

M57N / M57TU / M57TUD30 (since 2002) 286 KM (210 kW; 282 KM), 580 Nm

E90 / E90LCI / E91 / E91LCI / E92 / E93 335d

M57TU2D30 (since 2007) 197 KM (145 kW; 194 KM), 400 Nm

E90 / E91 / E92 325d
E60 / E61 525d / 525xd

M57TU2D30 (since 2007) 231 KM (170 kW; 228 KM), 500 Nm

E65 730d
E90 / E91 325d
E90 / E91 330d / 330xd

M57TU2D30 (since 2007) 235 KM (173 kW; 232 KM), 500 Nm

E60 / E61 / E70 / E71

M57TU2D30 (since 2007) 286 KM (210 kW; 282 KM), 580 Nm

E60 / E61 535d
E70 X5 3.0sd
E71 X6 xDrive35d
E83 X3 3.0sd
E90 / E91 335d


Kit contents:

    Manifold gaskets (manufacturer of your choice): 6 pcs. item 2 + 6 pcs. item 3
EGR valve gasket (manufacturer of your choice): 1 pc. item 4
Manifold plugs: 6 pcs. with Viton O-rings, resistant to oil and high and low temperatures
Illustrated installation instructions—available for download in the Attachments tab.

There are two sizes of plugs

: - larger plugs (33 mm) suitable for vehicles manufactured from 2004 onward
- smaller ones (22 mm—available in another listing) designed for cars manufactured before 2004.

In 2004 and early 2005, two types of swirl flaps were installed in 6-cylinder engines; please check before purchasing.

Technical

Specifications:

Intake manifold plugs with an original German Viton O-ring, resistant to oil and both high and low temperatures.
Plugs made of PA66 GF35 plastic—the same material as the intake manifold and swirl
flaps. Perfect dimensional consistency.
    Polish product.


Aditech Sp. z o.o. assumes no liability for the use of this part on public roads where the removal of emission control devices is prohibited. It is the customer’s responsibility to ensure compliance with the rules and regulations applicable in their home country. For use in motorsports off public roads.