BY019 EGR removal kit for 2.2 HDi / TDCi Citroën, Ford, Peugeot and Land Rover
Quantity:
Gross price
Price:
269.00
Tax included
- Delivery: Courier (free of charge)
- Delivery: 1–2 days
Secure payments
Manufacturer’s warranty
Help with choosing
EGR System Removal Kit with Exhaust Cooler
Product description:
Application
- Ford Ranger (TKE) 2.2 TDCi 4x4, 2198 cm³, engine codes GBVAJQW / ENQW, 125 KM/92 kW, from 04/2011
- Ford Ranger (TKE) 2.2 TDCi 4x4, 2198 cm³, engine code T22DD0P, 131 KM/96 kW, from 05/2015
- Ford Ranger (TKE) 2.2 TDCi, 2198 cm³, engine codes GBVAJQW / ENQW, 125 KM/92 kW, from 2011/04
- Ford Ranger (TKE) 2.2 TDCi, 2198 cm³, engine code T22DD0P, 131 KM/96 kW, from May 2015
- Ford Ranger (TKE) 2.2 TDCi 4x4, 2198 cm³, engine codes GBVAJQJ / T22DD0P, 160 KM/118 kW, from 2015/05
- Ford Ranger (TKE) 2.2 TDCi, 2198 cm³, engine codes GBVAJQJ / T22DD0P, 160 KM/118 kW, from May 2015
- Ford Ranger (TKE) 2.2 TDCi, 2,198 cm³, engine codes GBVAJPF / ENPF, 120 KM/88 kW, from April 2011
- Ford Ranger (TKE) 3.2 TDCi 4x4, 3,198 cm³, engine codes SA2R / SA2S / SA2W / ENSA / SAFA / P5-AT, 200 KM/147 kW, from April 2011
- Ford Ranger (TKE) 2.2 TDCi 4x4, 2,198 cm³, engine codes GBVAJQJ / ENQJ, 150 KM/110 kW, from April 2011
- Ford Ranger (TKE) 2.2 TDCi, 2,198 cm³, engine codes GBVAJQJ / ENQJ, 150 KM/110 kW, from November 2011
Engine displacement: 2.2 Diesel (2198 cm³) and 3.2 Diesel (3198–3199 cm³)
The vehicles listed above may have featured different versions of the EGR valve. Please check the EGR valve carefully before purchasing a part.
Replaces OEM parts numbers
- 1911027 – FORD
- 2428047 – FORD
- FB3Q-9U443-AA – FORD
- FB3Q9U443AB – FORD
- FB3Z-9U433-B – FORD
- 88995 – MEAT&DORIA
- 989576 – NISSENS
- 48431 – NRF
- V25630076 – VEMO
Benefits of Installing an EGR Plug
- Reduced contaminants in the intake—no backflow of exhaust gases means a cleaner intake manifold, less carbon buildup, and fewer deposits.
- More stable engine operation – less idle speed fluctuation, better throttle response.
- Improved performance and dynamics – the absence of hot exhaust gases in the intake improves fuel-air mixture quality and combustion efficiency.
- Lower risk of EGR malfunctions—elimination of the source of failure (stuck valve, damaged actuator, controller errors).
- Less exhaust smoke—in many cases, combustion becomes more complete.
- Extended engine oil life – less soot entering the oil via blow-by.
- Possible reduction in fuel consumption—in some engines.
- Lower intake temperatures—which can have a beneficial effect on the turbocharger and intercooler.
Technical Specifications
- plug material: acid-resistant steel, aluminum
- All plugs undergo specialized vibratory finishing. This process removes sharp edges and smooths the surface
- Gasket material: GAMBIT AF-1000—a material with exceptionally high strength properties, resistant to all conditions encountered in the exhaust system
- Note: Plugging the valve may cause a warning light to illuminate on the dashboard. In this case, the EGR valve must be deactivated via the vehicle’s software.
Aditech Sp. z o.o. assumes no liability for the use of this part on public roads where the removal of emission control devices is prohibited. It is the customer’s responsibility to ensure compliance with the rules and regulations applicable in their home country. For use in motorsports off public roads.
A kit for removing the entire EGR system, designed for 2.2 HDi, 2.2 TDCi and 2.2 Td4 (2198 ccm) engines fitted to the Ford Ranger and Land Rover Defender. The product eliminates problems with the EGR valve, improves engine performance and running smoothness, and reduces carbon build-up in the intake system. High-quality materials ensure durability and reliability in all conditions. The ideal solution for users looking for a reliable and effective EGR plug.
| Manufacturer | ADITECH |
|---|---|
| Materiał uszczelki | Citroën Ford Peugeot Volvo |
| Safety information | Install the product in accordance with its intended use. Before installation, check the condition of the product and ensure it is suitable for the intended application. Installation should be carried out by a person with the appropriate technical knowledg |
| Manufacturer’s code | AT-BY019 |
