BMW INOX EGR exhaust gas recirculation cooler bypass connector 8507334
Quantity:
Gross price
Price:
55.00
Tax included
- Delivery: Courier (free of charge)
- Delivery: 1–2 days
Secure payments
Manufacturer’s warranty
Help with choosing
Coolant hose connector, used after removing the exhaust cooler, bypass
Product description:
Application
- BMW 5 Series F07 GT 530d xDrive 3.0 N57 Gran Turismo 245KM/180kW 05/2010–06/2012
- BMW 5 Series F07 GT 535d xDrive 3.0 N57S Gran Turismo 299KM/220kW 05/2010–06/2012
- BMW X5 E70 LCI 30d xDrive 3.0 N57 SAV 245KM/180kW 04/2010–06/2013
- BMW X5 E70 LCI 40d xDrive 3.0 N57S SAV 306KM/225kW 04/2010–06/2013
- BMW X6 E71 30d xDrive 3.0 N57 SAC 245KM/180kW 04/2010–06/2014
- BMW X6 E71 40d xDrive 3.0 N57S SAC 306KM/225kW 04/2010–06/2014
Engine displacement: 2,993 cm³
The vehicles listed above may have been equipped with different types of exhaust coolers. Please check carefully before purchasing parts.
Replaces parts with the following OEM numbers
- 11618509116
- 8509116
- 8507334
Benefits of installing the EGR plug-in kit and removing the exhaust gas recirculation (EGR) cooler
- Reduced contamination in the intake system—no backflow of exhaust gases means a cleaner intake manifold and less carbon buildup and deposits.
- More stable engine operation—less idle speed fluctuation, better throttle response.
- Improved performance and dynamics—the absence of hot exhaust gases in the intake improves air-fuel mixture quality and combustion efficiency.
- Lower risk of EGR system failures—elimination of potential failure sources (stuck valve, damaged actuator, controller errors).
- Less exhaust smoke—in many cases, combustion becomes more complete.
- Extended engine oil life – less soot entering the oil via blow-by.
- Possible reduction in fuel consumption—in some engines.
- Lower intake temperatures—which can have a beneficial effect on the turbocharger and intercooler.
Technical Specifications
- Plug material: acid-resistant steel,
- Note: This connector is intended for use when the exhaust gas cooler is removed.
Aditech Sp. z o.o. assumes no liability for the use of this part on public roads where the removal of emission control devices is prohibited. It is the customer’s responsibility to ensure compliance with the rules and regulations applicable in their home country. For use in motorsports off public roads.
A bypass connector designed to connect the inlet and outlet pipes of the EGR exhaust gas cooler in BMW engines. This component enables the permanent and safe bypassing of the exhaust gas cooler when the EGR system has been blocked off or completely removed.
Using the bypass simplifies the intake system and prevents problems arising from leaks or failure of the exhaust gas recirculation (EGR) cooler. The product is made from high-quality stainless steel, resistant to high temperatures, corrosion and the aggressive operating conditions of the engine, ensuring a long service life and reliability.
The connector has been designed for a precise fit, ensuring that installation is quick and requires no additional modifications.
| Manufacturer | ADITECH |
|---|---|
| Materiał uszczelki | BMW |
| Safety information | Install the product in accordance with its intended use. Before installation, check the condition of the product and ensure it is suitable for the intended application. Installation should be carried out by a person with the appropriate technical knowledg |
| Manufacturer’s code | AT-BMW-X25 |
