Bypass kit for removing the EGR cooler on the 1.9 TDI (BLT, BSW)

Product code AT-BY005 EAN 5904276582725
Quantity:
Gross price
Price: 150.00
Tax included
Secure payments
Manufacturer’s warranty
Help with choosing

Exhaust Cooler Removal Kit, Bypass

Product description:

Application

  • Volkswagen POLO (9N_) 1.9 TDI (BLT) 1896cc 130KM/96kW 11/2003–11/2009
  • Škoda FABIA I (6Y2) 1.9 TDI RS (BLT) 1,896 ccm 130 KM/96 kW 2003/06–2008/03
  • Seat IBIZA III (6L1) 1.9 TDI (BLT) 1,896 cc 131 KM/96 kW 2002/02–2009/11
  • Seat CORDOBA (6L2) 1.9 TDI (BLT) 1,896 cc 131 KM/96 kW 2002/10–2009/11
  • Skoda ROOMSTER (5J7) 1.9 TDI (BSW) 1,896 cc 105 KM/77 kW 09/2006–03/2010
  • Škoda FABIA II Combi (545) 1.9 TDI (BSW) 1,896 cc 105 KM/77 kW 10/2007–03/2010
  • Škoda FABIA II (542) 1.9 TDI (BSW) 1,896 cc 105 KM/77 kW 2007/04–2010/03
  • Volkswagen NEW BEETLE Convertible (1Y7) 1.9 TDI (BSW) 1,896 cc 105 KM/77 kW 2005/07–2010/09
  • Volkswagen NEW BEETLE (9C1, 1C1) 1.9 TDI (BSW) 1,896 cc 105 KM/77 kW 2005/07–2010/09

Engine displacement: 1.9 TDI (1896 cm³)

The vehicles listed above may have been equipped with different types of exhaust coolers. Please check carefully before purchasing parts.

Replaces OEM parts numbers

  • 038 131 513 K
  • 038131513K
  • 038 131 513 AB
  • 038131513AB

Benefits of installing the EGR bypass kit and removing the exhaust cooler

  • Reduced contaminants in the intake—no backflow of exhaust gases means a cleaner intake manifold, less carbon buildup, and fewer deposits.
  • More stable engine operation—less idle speed fluctuation, better throttle response.
  • Improved performance and dynamics—the absence of hot exhaust gases in the intake improves fuel-air mixture quality and combustion efficiency.
  • Lower risk of EGR system failures—elimination of potential failure sources (stuck valve, damaged actuator, controller errors).
  • Less exhaust smoke—in many cases, combustion becomes more complete.
  • Extended engine oil life – less soot entering the oil via blow-by.
  • Possible reduction in fuel consumption—in some engines.
  • Lower intake temperatures—which can have a beneficial effect on the turbocharger and intercooler.

Technical Specifications

  • Plug material: acid-resistant steel, powder-coated
  • Note: This kit is intended for use when removing or plugging the exhaust gas recirculation (EGR) valve.

Aditech Sp. z o.o. assumes no liability for the use of this part on public roads where the removal of emission control devices is prohibited. It is the customer’s responsibility to ensure compliance with the rules and regulations applicable in their home country. For use in motorsports off public roads.

Exhaust cooler removal kit suitable for: 1.9 TDI (BLT/BSW)
A complete kit for removing the exhaust cooler from 1.9 TDI engines with a displacement of 1896 cm³, fitted in vehicles such as the VW Polo, Škoda Fabia, SEAT Ibiza and New Beetle. 

Manufacturer ADITECH
Materiał uszczelki Seat Volkswagen Škoda
Safety information Install the product in accordance with its intended use. Before installation, check the condition of the product and ensure it is suitable for the intended application. Installation should be carried out by a person with the appropriate technical knowledg
Manufacturer’s code AT-BY005

Recommended