091 EGR plug for VW, Audi and Škoda 1.4, 1.6 and 2.0 TDI CR

Product code AT-EGR-091 EAN 5908321404864
Type of end cap
Quantity:
Gross price
Price: 10.00
Tax included
Secure payments
Manufacturer’s warranty
Help with choosing

Application:


Audi:

A3 / S3 2.0 TDI, engine codes: CFFA, CFFB
Q3 2.0 TDI, engine codes: CFFA, CFFB, CFGC, CFGD, CLLB, CLJA
TT / TTS 2.0 TDI, engine codes: CFGB

Volkswagen:

    Beetle 2.0 TDI, engine codes: CFFB
Caddy III 2.0 TDI, engine codes: CFHC, CFHF, CLCA, CFHE, CFJA, CLCB
CC 2.0 TDI, engine codes: CFFA, CFFB, CFGB, CLLA, CFGC
Eos 2.0 TDI, engine codes: CFFA, CFFB
Golf VI 2.0 TDI, engine codes: CLCA, CFHB, CFHC, CFFA, CFFB, CFGB
Golf Plus 2.0 TDI, engine codes: CFHB, CFHC, CLCA
Jetta IV 2.0 TDI, engine codes: CLCA, CFHC, CLCB, CFFB
Passat 2.0 TDI, engine codes: CFFA, CFFB, CFGB, CLLA, CFGC
Scirocco: 2.0 TDI, engine codes: CFGB, CFHB, CFHC, CFGC
Sharan 2.0 TDI, engine codes: CFFA, CFFB, CFGB, CLLA, CFGC
Tiguan 2.0 TDI, engine codes: CFFA, CFFB, CFFD, CFGB, CLJA, CFGC
Touran 2.0 TDI, engine codes: CLCA, CFHC, CFJA, CFJB, CFHF
Polo 1.2 TDI, engine codes: CFWA

Seat:

    Alhambra 2.0 TDI, engine codes: CFFA, CFFB, CFGB, CFFE, CFGC
Altea / XL 2.0 TDI, engine codes: CFHC
Leon 2.0 TDI, engine codes: CFHC, CFJA, CLCB

Skoda:

    Octavia II 2.0 TDI, engine codes: CLCA, CLCB, CFHC, CFHF
Superb II 2.0 TDI, engine codes: CFFB, CFGB, CLJA
Yeti 2.0 TDI, engine codes: CFHA, CFHF, CFHC, CFJA, CLBA, CLCA
Fabia 1.2 TDI, engine codes: CFWA
Fabia Combi 1.2 TDI, engine codes: CFWA
Roomster 1.2 TDI, engine codes: CFWA
Praktik 1.2 TDI, engine codes: CFWA


The plug does not fit 1st-generation 2.0 TDI CR

engines. Solid plug—requires removal of the EGR valve from the engine software

Technical

Specifications:

plug material: 1.5 mm acid-resistant steel;
all plugs undergo specialized vibratory finishing. This process removes sharp edges and smooths the surface;


Aditech Sp. z o.o. assumes no liability for the use of this part on public roads where the removal of emission control devices is prohibited. It is the customer’s responsibility to ensure compliance with the rules and regulations applicable in their home country. For use in motorsports off public roads.

EGR valve cap and seals for VW cars with 1.2 TDi / 1.6 TDi / 2.0 TDi engines

Thickness of the end cap 1.5 mm
Manufacturer ADITECH
Safety information Install the product in accordance with its intended use. Before installation, check the condition of the product and ensure it is suitable for the intended application. Installation should be carried out by a person with the appropriate technical knowledg
Manufacturer’s code AT-EGR-091

Recommended