F44A BMW M57 Performance Intake Manifold Adapter

Application:

BMW

    3 (E90)
335d (M57 D30 (306D5)) 2993cc 286KM/210kW 2006/09–2011/12

    3 Touring (E91)
335d (M57 D30 (306D5)) 2,993 cc 286 KM/210 kW 2006/09–2012/06

    3 Coupe (E92)
335 d (M57 D30 (306D5)) 2,993 cc 286 KM/210 kW 2006/03–2013/03

    3 Convertible (E93)
330 d (M57 D30 (306D3)) 2,993 cc 231 KM/170 kW 2007/03–2013/12

    5 (E60)
525d (M57 D25 (256D2)) 2,497 cc 163 KM/120 kW Dec 2004–Mar
2010 525d (M57 D25 (256D2)) 2,497 cc 177 KM/130 kW 2004/06–2010/03
530 d (M57 D30 (306D2)) 2,993 cc 218 KM/160 kW 2002/09–2005/09
535 d (M57 D30 (306D4)) 2,993 cc 272 KM/200 kW 2004/09–2010/03
535 d (M57 D30 (306D5)) 2,993 cc 286 KM/210 kW 2007/01–2010/03

    5 Touring (E61)
525 d (M57 D25 (256D2)) 2,497 cc 177 KM/130 kW 2004/03–2007/03
530 d (M57 D30 (306D2)) 2,993 ccm 218 KM/160 kW 2004/03–2005/09
535 d (M57 D30 (306D4)) 2,993 cc 272 KM/200 kW 2004/09–2010/12
535 d (M57 D30 (306D5)) 2,993 cc 286 KM/210 kW 2007/01–2010/12

    6 (E63)
635 d (M57 D30 (306D5)) 2,993 cc 286 KM/210 kW 2007/07–2010/07

    6 Convertible (E64)
635 d (M57 D30 (306D5)) 2,993 cc 286 KM/210 kW 2007/07–2010/07

    X3 (E83)
3.0 d (M57 D30 (306D2)) 2,993 cc 204 KM/150 kW 2004/01–2005/08
xDrive 30 d (M57 D30 (306D3)) 2,993 cc 211 KM/155 kW 2008/09–2010/08

    X5 (E53)
3.0 d (M57 D30 (306D1)) 2,925 cc 184 KM/135 kW 2001/04–2003/09
3.0 d (M57 D30 (306D2)) 2,993 cc 218 KM/160 kW Oct 2003–Sep 2006

    X6 (E71, E72)
xDrive 35 d (M57 D30 (306D5)) 2,993 cc 286 KM/210 kW Jan 2008–Mar 2010

Note: The vehicles listed above may have had different versions of the EGR valve. Please check the EGR valve carefully before purchasing parts.

Installation requires reaming the intake manifold to a 60.3 mm
diameter hole

Part Numbers:

    Intake manifold: 11617800585

The kit includes:

    1 x EGR
valve replacement 1 x VICTOR REINZ
EGR valve gasket 1 x Clamp
1 x Reinforced 6mm
exhaust manifold plug 1 x REINZ EXTREME
reinforced exhaust manifold plug gasket 6 x mounting bolts with washers
1 x aluminum cap for the EGR cooler supply hose (allowing for complete removal of the EGR cooler)
1 x aluminum cap for the EGR cooler outlet hose, including a bleed screw and O-ring (allowing for complete removal of the EGR cooler)

Technical Specifications:


Design: ADITECH;
Manufacturer: ADITECH;
Material: acid-resistant steel;
Gasket material: REINZ EXTREME;
Pipe diameter: 60.3 mm;
    total length: 130 mm;
the set includes exhaust gas recirculation (EGR) cooler hose plugs, allowing for the complete removal of the coolers along with the EGR thermostat. One plug features a bleed screw that allows the cooling system to be bled.


Aditech Sp. z o.o. assumes no liability for the use of this part on public roads where the removal of emission control devices is prohibited. It is the customer’s responsibility to ensure compliance with the rules and regulations applicable in their home country. For use in motorsports off public roads.