F50/3 Replacement EGR plug for BMW E38, E46, E39 3.0 D M57

Application:

BMW

3 (E46)

330d (M57 D30 (306D1)) 2926cc 184KM/135kW Oct 1999–Feb
2005 330d (M57 D30 (306D2)) 2,993 ccm 204 KM/150 kW Mar 2003–Feb
2005 330 xd (M57 D30 (306D1)) 2,926 ccm 184 KM/135 kW Jan 2000–Feb
2003 330 xd (M57 D30 (306D2)) 2,993 ccm 204 KM/150 kW Sep 2002–Dec

2004 3 Touring (E46)

330 d (M57 D30 (306D1)) 2,926 cc 184 KM/135 kW 10/1999–02/2005
330 d (M57 D30 (306D2)) 2,993 cc 204 KM/150 kW Mar 2003–Feb
2005 330 xd (M57 D30 (306D1)) 2,926 cc 184 KM/135 kW Jan 2000–Mar 2003
330 xd (M57 D30 (306D2)) 2,993 cc 204 KM/150 kW Aug 2002–May

2005 5 (E39)

525 d (M57 D25 (256D1)) 2,497 cc 163 KM/120 kW 2000/02–2003/06
530 d (M57 D30 (306D1)) 2,926 cc 184 KM/135 kW Aug 1998–Sep
2000 530 d (M57 D30 (306D1)) 2,926 cc 193 KM/142 kW Sep 1998–Jun

2003 5 Touring (E39)

525 d (M57 D25 (256D1)) 2,497 cc 163 KM/120 kW 2000/02–2004/05
530 d (M57 D30 (306D1)) 2,926 ccm 184 KM/135 kW 1998/08–2000/09
530 d (M57 D30 (306D1)) 2,926 ccm 193 KM/142 kW 2000/09–2004/05

7 (E38)

730 d (M57 D30 (306D1)) 2,926 cc 184 KM/135 kW Aug 1998–Apr
2000 730 d (M57 D30 (306D1)) 2,926 cc 193 KM/142 kW April 2000–November

2001 Note: The vehicles listed above may have had different versions of EGR valves. Please check the EGR valve carefully before purchasing a part.

Part numbers:

    EGR valve: 11717804378
exhaust cooler: 11717787404

The set includes:

    1 x EGR
valve replacement 1 x VICTOR REINZ
EGR valve gasket 1 x clamp
1 x exhaust
manifold plug 1 x exhaust
manifold plug gasket 6 x mounting bolts with washers
1 x aluminum plugfor the EGR cooler inlet hose (allowing for complete removal of the EGR cooler)
1 x aluminum cap for the EGR cooler outlet hose, including a bleed screw and O-ring (allowing for complete removal of the EGR cooler)

Technical Specifications:


Design: ADITECH;
Manufacturer: ADITECH;
Material: acid-resistant steel;
Gasket material: GAMBIT AF-1000;
    tube diameter: 54 mm;
total length: 90 mm;
the set includes exhaust gas recirculation (EGR) cooler hose plugs, allowing for complete removal of the coolers along with the EGR thermostat. One plug features a bleed screw that allows the cooling system to be bled.


Aditech Sp. z o.o. assumes no liability for the use of this part on public roads where the removal of emission control devices is prohibited. It is the customer’s responsibility to ensure compliance with the rules and regulations applicable in their home country. For use in motorsports off public roads.