AF-Oil gasket material, 0.3 mm, 500 x 1500 mm, Gambit gasket sheet
Quantity:
Gross price
Price:
78.10
Tax included
- Delivery: Courier (free of charge)
- Delivery: 1–2 days
Secure payments
Manufacturer’s warranty
Help with choosing
Gambit AF-Oil 0.3 mm Gasket Sheet – 500×1500 mm sheet for cutting gaskets
The Gambit AF-Oil gasket-cutting sheet (0.3 mm, 500×1500 mm) is a sealing material used by workshops, service centers, and DIY enthusiasts. An asbestos-free aramid sheet (commonly known as Klingerite) with consistent manufacturer quality. An oil-resistant aramid sheet designed for high temperatures and pressures, approved for joints subject to technical supervision.
At ADITECH, we cut the 500×1500 mm sheet from original Gambit material (manufacturer’s sheet size: 1500×1500 mm). This large sheet is ideal for multiple gaskets or large flange components—a sensible compromise between a full sheet and a small piece of material.
Why choose the AF-Oil gasket?
- Temperature resistance: up to 300°C (continuous operation from -60°C; up to 350°C for short periods; up to 230°C in steam)
- Maximum pressure / load: 10 MPa
- Media resistance: water, steam, fuels, oils, salt solutions, natural gas, propane-butane
- Asbestos-free material—safe to process and install
- Easy to cut: with a utility knife, scissors, a die cutter, on a plotter, or with a cutting machine
- Genuine Gambit material, well-known and widely used in industry and the automotive sector
What is the AF-Oil gasket sheet used for?
Typical applications:
- under-cover joints
- oil and fuel systems
- gas systems
- water and steam systems
Technical Specifications
- Manufacturer: Gambit
- Grade / Series: AF-Oil (GAMBIT AF High)
- Material type: asbestos-free material – aramid sheet
- Composition: KEVLAR® aramid fibers, mineral fibers and fillers, NBR rubber binder
- Thickness: 0.3 mm
- Dimensions: 500×1500 mm
- Weight: approx. 0.45 kg
- Operating temperature: up to 300°C (continuous operation from -60°C; short-term up to 350°C; in steam up to 230°C)
- Pressure: 10 MPa
- Media: water, steam, fuels, oils, salt solutions, natural gas, propane-butane
- Certifications and markings: DVGW, DNV, TA Luft (VDI 2200), BAM, WRAS, UDT, PZH; DIN 28091-2 marking: FA-AM1-O
- Color: green
- Material origin: manufacturer’s sheet, 1500×1500 mm
How to cut a gasket from a gasket sheet?
- Trace the shape of the old gasket or flange directly onto the sheet.
- Cut along the outline with a sharp knife, scissors, or a die cutter—for large batches, a plotter is best.
- Drill the screw holes with a punch or hole saw, and gently smooth the edges.
- When installing, tighten the screws evenly, in a crisscross pattern, using the torque recommended for the specific connection.
Frequently Asked Questions
Does the AF-Oil panel contain asbestos?
No. Gambit AF-Oil is an asbestos-free material that complies with applicable regulations.
What thickness of gasket sheet should I choose?
Thinner sheets (0.3–1 mm) work well on smooth, rigid surfaces, while thicker ones (1.5–4 mm) better fill in unevenness and compensate for flange deformation. The easiest way is to measure your old gasket.
Need a different size or thickness?
We offer additional sizes and thicknesses of this material—and if you can’t find the size you need, write to us, and we’ll check if we can cut it to size.
The specified limit values (temperature, pressure) do not occur simultaneously and are for reference only. The selection of material for a specific application should be verified against the manufacturer’s technical data sheet.
Gambit AF-Oil gasket sheet, 0.3 mm thick, 500×1500 mm – asbestos-free aramid sheet for cutting your own flat gaskets. Suitable for use up to 300°C.
| Safety information | Material for making gaskets. Check that it is suitable for the operating conditions (temperature, pressure, medium). Cut carefully using a sharp tool. Wear gloves and safety goggles; wear a dust mask if dust is generated. Beware of sharp edges. Store in a |
|---|---|
| Manufacturer’s code | AF-Oil |
| Record label | Gambit |
| Album genre | AF-Oil |
| Thickness (mm) | 0.3 |
| Width (mm) | 500 |
| Length (mm) | 1,500 |
| Max. temperature (°C) | 300 |
