Why choose the AF-Oil gasket?

• Temperature resistance: up to 300°C (continuous operation from -60°C; up to 350°C for short periods; up to 230°C in steam)
• Maximum pressure / load: 10 MPa
• Media resistance: water, steam, fuels, oils, salt solutions, natural gas, propane-butane
• Asbestos-free material—safe to process and install
• Easy to cut: with a utility knife, scissors, a die cutter, on a plotter, or with a cutting machine
• Genuine Gambit material, well-known and widely used in industry and the automotive sector

What is the AF-Oil gasket sheet used for?

Typical applications:

• under-cover joints
• oil and fuel systems
• gas systems
• water and steam systems

Technical Specifications

• Manufacturer: Gambit
• Grade / Series: AF-Oil (GAMBIT AF High)
• Material type: asbestos-free material – aramid sheet
• Composition: KEVLAR® aramid fibers, mineral fibers and fillers, NBR rubber binder
• Thickness: 1 mm
• Dimensions: 750×750 mm
• Weight: approx. 1.12 kg
• Operating temperature: up to 300°C (continuous operation from -60°C; up to 350°C for short periods; up to 230°C in steam)
• Pressure: 10 MPa
• Media: water, steam, fuels, oils, salt solutions, natural gas, propane-butane
• Certifications and markings: DVGW, DNV, TA Luft (VDI 2200), BAM, WRAS, UDT, PZH; DIN 28091-2 marking: FA-AM1-O
• Color: green
• Material origin: manufacturer’s sheet, 1500×1500 mm

How to cut a gasket from a gasket sheet?

• Trace the shape of the old gasket or flange directly onto the sheet.
• Cut along the outline with a sharp knife, scissors, or a die cutter—for large batches, a plotter is best.
• Drill the screw holes with a punch or hole saw, and gently smooth the edges.
• When installing, tighten the screws evenly, in a crisscross pattern, using the torque recommended for the specific connection.

Frequently Asked Questions

Does the AF-Oil panel contain asbestos?

No. Gambit AF-Oil is an asbestos-free material that complies with applicable regulations.

What thickness of gasket sheet should I choose?

Thinner sheets (0.3–1 mm) work well on smooth, rigid surfaces, while thicker ones (1.5–4 mm) better fill in unevenness and compensate for flange deformation. The easiest way is to measure your old gasket.

Need a different size or thickness?

We offer additional sizes and thicknesses of this material—and if you can’t find the size you need, write to us, and we’ll check if we can cut it to size.