Why choose the AF-200 Universal sheet?

• Temperature resistance: up to 220°C (continuous operation from -60°C; up to 300°C for short periods; up to 180°C in steam)
• Maximum pressure / contact pressure: 6 MPa
• Media resistance: most media within the range of moderate pressures and temperatures, including water, steam, fuels, and oils
• Asbestos-free material—safe to handle and install
• Easy to cut: with a utility knife, scissors, a die cutter, on a plotter, or with a cutting machine
• Genuine Gambit material, well-known and widely used in industry and the automotive sector

What is the AF-200 Universal gasket sheet used for?

Typical applications:

• general-purpose installations
• gas systems (DVGW, H2-ready)
• oil and fuel systems

Technical Specifications

• Manufacturer: Gambit
• Grade / Series: AF-200 Universal (GAMBIT AF General)
• Material type: asbestos-free material – aramid sheet
• Composition: KEVLAR® aramid fibers, mineral fibers and fillers, NBR rubber binder
• Thickness: 2 mm
• Dimensions: 500×1500 mm
• Weight: approx. 3 kg
• Operating temperature: up to 220°C (continuous operation from -60°C; up to 300°C for short periods; up to 180°C in steam)
• Pressure: 6 MPa
• Media: most media in the medium-pressure and medium-temperature range, including water, steam, fuels, and oils
• Certifications and markings: DVGW, DVGW H2-ready, DNV, TA Luft (VDI 2200), INIG, UDT; DIN 28091-2 marking: FA-AM1-O
• Color: red
• Material origin: manufacturer’s sheet, 1500×1500 mm

How to cut a gasket from a gasket sheet?

• Trace the shape of the old gasket or flange directly onto the sheet.
• Cut along the outline with a sharp knife, scissors, or a die cutter—for large batches, a plotter is best.
• Drill the screw holes with a punch or hole saw, and gently smooth the edges.
• When installing, tighten the screws evenly, in a crisscross pattern, using the torque recommended for the specific connection.

Frequently Asked Questions

Does the AF-200 Universal panel contain asbestos?

No. Gambit AF-200 Universal is an asbestos-free material that complies with applicable regulations.

What thickness of gasket sheet should I choose?

Thinner sheets (0.3–1 mm) work well on smooth, rigid surfaces, while thicker ones (1.5–4 mm) better fill in unevenness and compensate for flange deformation. The easiest way is to measure your old gasket.

Need a different size or thickness?

We offer additional sizes and thicknesses of this material—and if you can’t find the size you need, write to us, and we’ll check if we can cut it to size.