AF-200 G gasket material, 1.5 mm, 500 x 750 mm, Gambit Klingerit
Quantity:
Gross price
Price:
123.10
Tax included
- Delivery: Courier (free of charge)
- Delivery: 1–2 days
Secure payments
Manufacturer’s warranty
Help with choosing
Gambit AF-200 G 1.5 mm gasket sheet – 500×750 mm sheet for cutting gaskets
Gambit AF-200 G, 1.5 mm thick, is an asbestos-free aramid sheet (commonly known as Klingerite) designed for cutting flat gaskets—from small washers to large flange gaskets. Available in this size: 500×750 mm. A flexible, high-performance sheet with graphite added, particularly recommended for steam applications.
At ADITECH, we cut the 500×750 mm sheet from original Gambit material (manufacturer’s sheet size: 1500×1500 mm). A versatile size for several gaskets at once or a single larger one—e.g., for a manifold, valve cover, or pipe flange. It fits in a workshop drawer.
Why choose the AF-200 G sheet?
- Temperature resistance: up to 320°C (continuous operation from -40°C; up to 380°C for short periods; up to 250°C in steam)
- Maximum pressure: 8 MPa
- Resistance to media: steam, water, fuels, oils
- Asbestos-free material—safe to process and install
- Easy to cut: with a utility knife, scissors, a die cutter, on a plotter, or with a cutting machine
- Original Gambit material, well-known and widely used in industry and the automotive sector
What is the AF-200 G gasket sheet used for?
Typical applications:
- steam systems
- water systems
- fuel and oil systems
Technical Specifications
- Manufacturer: Gambit
- Grade / Series: AF-200 G (GAMBIT AF High)
- Material type: asbestos-free material – aramid sheet
- Composition: KEVLAR® aramid fibers, graphite, mineral fibers and fillers, NBR rubber binder
- Thickness: 1.5 mm
- Dimensions: 500×750 mm
- Weight: approx. 1.07 kg
- Operating temperature: up to 320°C (continuous operation from -40°C; up to 380°C for short periods; up to 250°C in steam)
- Pressure: 8 MPa
- Media: steam, water, fuels, oils
- Certifications and markings: TA Luft (VDI 2200), UDT; DIN 28091-2 marking: FA-AM1-O
- Color: graphite
- Material origin: manufacturer’s sheet, 1500×1500 mm
How do you cut a gasket from a gasket sheet?
- Trace the shape of the old gasket or flange directly onto the sheet.
- Cut along the outline with a sharp knife, scissors, or a die cutter—for large batches, a plotter is best.
- Drill the screw holes with a punch or hole saw, and gently smooth the edges.
- When installing, tighten the screws evenly, in a crisscross pattern, using the torque recommended for the specific connection.
Frequently Asked Questions
Does the AF-200 G panel contain asbestos?
No. Gambit AF-200 G is an asbestos-free material that complies with applicable regulations.
What thickness of gasket sheet should I choose?
Thinner sheets (0.3–1 mm) work well on smooth, rigid surfaces, while thicker ones (1.5–4 mm) better fill in unevenness and compensate for flange deformation. The easiest way is to measure your old gasket.
Need a different size or thickness?
We offer additional sizes and thicknesses of this material—and if you can’t find the size you need, write to us, and we’ll check if we can cut it to size.
The specified limit values (temperature, pressure) do not occur simultaneously and are for reference only. The selection of material for a specific application should be verified against the manufacturer’s technical data sheet.
Gambit AF-200 G gasket sheet, 1.5 mm thick, dimensions 500×750 mm – asbestos-free aramid sheet for cutting your own flat gaskets. Suitable for use up to 320°C.
| Safety information | Material for making gaskets. Check that it is suitable for the operating conditions (temperature, pressure, medium). Cut carefully using a sharp tool. Wear gloves and safety goggles; wear a dust mask if dust is generated. Beware of sharp edges. Store in a |
|---|---|
| Manufacturer’s code | AF-200 G |
| Record label | Gambit |
| Album genre | AF-200 G |
| Thickness (mm) | 1.5 |
| Width (mm) | 500 |
| Length (mm) | 750 |
| Max. temperature (°C) | 320 |
