AF-153 gasket material, 0.5 mm, 750 x 1500 mm, Gambit gasket sheet
Quantity:
Gross price
Price:
99.20
Tax included
- Delivery: Courier (free of charge)
- Delivery: 1–2 days
Secure payments
Manufacturer’s warranty
Help with choosing
Gambit AF-153 0.5 mm gasket sheet – 750×1500 mm sheet for cutting gaskets
Gambit AF-153, 0.5 mm thick, is an asbestos-free fiber-elastomer sheet (commonly known as Klingerit) designed for cutting flat gaskets—from small washers to large flange gaskets. Available in this size: 750×1500 mm. A low-parameter sheet based on natural fibers, intended primarily for water supply and sewer systems.
At ADITECH, we cut the 750×1500 mm sheet from original Gambit material (manufacturer’s sheet size: 1500×1500 mm). A large sheet suitable for multiple gaskets or large flange components—a reasonable compromise between a full sheet and a small piece of material.
Why choose the AF-153 sheet?
- Temperature resistance: up to 155°C (continuous operation from -30°C; up to 180°C for short periods; up to 130°C in steam)
- Maximum pressure / load: 4 MPa
- Media resistance: drinking water, wastewater
- Asbestos-free material—safe to process and install
- Easy to cut: with a utility knife, scissors, a die cutter, on a plotter, or with a cutting machine
- Original Gambit material, well-known and widely used in industry and the automotive sector
What is the AF-153 gasket sheet used for?
Typical applications:
- water supply systems
- sewer systems
Technical specifications
- Manufacturer: Gambit
- Grade / Series: AF-153 (GAMBIT AF Economical)
- Material type: asbestos-free material – fiber-elastomer board
- Composition: natural fibers, mineral fibers, and fillers; binder made from a blend of NBR and SBR rubbers
- Thickness: 0.5 mm
- Dimensions: 750×1500 mm
- Weight: approx. 1.07 kg
- Operating temperature: up to 155°C (continuous operation from -30°C; up to 180°C for short periods; up to 130°C in steam)
- Pressure: 4 MPa
- Media: drinking water, wastewater
- Certifications and markings: WRAS, UDT; DIN 28091-2 marking: FA-AM12-O
- Color: light green
- Material origin: manufacturer’s sheet, 1500×1500 mm
How do you cut a gasket from a gasket sheet?
- Trace the shape of the old gasket or flange directly onto the sheet.
- Cut along the outline with a sharp knife, scissors, or a die cutter—for large batches, a plotter is best.
- Drill the screw holes with a punch or hole saw, and gently smooth the edges.
- When installing, tighten the screws evenly, in a crisscross pattern, using the torque recommended for the specific connection.
Frequently Asked Questions
Does the AF-153 panel contain asbestos?
No. Gambit AF-153 is an asbestos-free material that complies with applicable regulations.
What thickness of sealing sheet should I choose?
Thinner sheets (0.3–1 mm) work well on smooth, rigid surfaces, while thicker ones (1.5–4 mm) better fill in unevenness and compensate for flange deformation. The easiest way is to measure your old gasket.
Need a different size or thickness?
We offer additional sizes and thicknesses of this material—and if you can’t find the size you need, write to us, and we’ll check if we can cut it to size.
The specified limit values (temperature, pressure) do not occur simultaneously and are for reference only. The selection of material for a specific application should be verified against the manufacturer’s technical data sheet.
Gambit AF-153 sealing sheet, thickness 0.5 mm, dimensions 750×1500 mm – an asbestos-free fibre-elastomer sheet for cutting flat gaskets to size. Suitable for use up to 155°C.
| Safety information | Material for making gaskets. Check that it is suitable for the operating conditions (temperature, pressure, medium). Cut carefully using a sharp tool. Wear gloves and safety goggles; wear a dust mask if dust is generated. Beware of sharp edges. Store in a |
|---|---|
| Manufacturer’s code | AF-153 |
| Record label | Gambit |
| Album genre | AF-153 |
| Thickness (mm) | 0.5 |
| Width (mm) | 750 |
| Length (mm) | 1,500 |
| Max. temperature (°C) | 155 |
