AF-1000 sealing sheet, 2 mm, 500 x 1250 mm, Gambit Klingerit
Quantity:
Gross price
Price:
371.10
Tax included
- Delivery: Courier (free of charge)
- Delivery: 1–2 days
Secure payments
Manufacturer’s warranty
Help with choosing
Gambit AF-1000 2 mm gasket sheet – 500×1250 mm sheet for cutting gaskets
Gambit AF-1000, 2 mm thick, is an asbestos-free aramid sheet (commonly known as Klingerit) designed for cutting flat gaskets—from small washers to large flange gaskets. Available in this size: 500×1250 mm. This aramid sheet is reinforced with steel mesh and offers very high mechanical strength. It performs well in high-temperature flanged connections, under pressure surges, and with high fluid flow rates—including in the automotive industry.
At ADITECH, we cut the 500×1250 mm sheet from original Gambit material (manufacturer’s sheet size: 1500×1500 mm). This large sheet is suitable for multiple gaskets or large flange components—a sensible compromise between a full sheet and a small piece of material.
Why choose the AF-1000 sheet?
- Temperature resistance: up to 350°C (continuous operation from -40°C; up to 420°C for short periods; up to 250°C in steam)
- Maximum pressure / load: 12 MPa
- Chemical resistance: water, steam, kerosene, gasoline, fuels, oils (not recommended for acids and bases)
- Works well as a material for exhaust gaskets—manifold, turbo, and EGR gaskets
- Asbestos-free material—safe to handle and install
- Easy to cut: with a utility knife, scissors, a die cutter, on a plotter, or with a cutting machine
- Genuine Gambit material, well-known and widely used in industry and the automotive sector
What is the AF-1000 gasket sheet used for?
Typical applications:
- gaskets for manifolds and exhaust systems
- high-temperature flange joints
- systems with large pressure fluctuations
- automotive
- gaskets in fuel and oil systems
Technical Specifications
- Manufacturer: Gambit
- Grade / Series: AF-1000 (GAMBIT AF High)
- Material type: asbestos-free material – aramid sheet
- Composition: KEVLAR® aramid fibers, mineral fibers and fillers, NBR rubber binder, galvanized steel mesh reinforcement
- Thickness: 2 mm
- Dimensions: 500×1250 mm
- Weight: approx. 2.88 kg
- Operating temperature: up to 350°C (continuous operation from -40°C; up to 420°C for short periods; in steam up to 250°C)
- Pressure: 12 MPa
- Media: water, steam, kerosene, gasoline, fuels, oils (not recommended for acids and bases)
- Certifications and markings: DNV, UDT; DIN 28091-2 marking: FA-AM1-ST
- Color: graphite
- Material origin: manufacturer’s sheet, 1500×1500 mm
How to cut a gasket from a gasket sheet?
- Trace the shape of the old gasket or flange directly onto the sheet.
- Cut along the outline with a sharp knife, scissors, or a die cutter—for large batches, a plotter is best.
- Drill the screw holes with a punch or hole saw, and gently smooth the edges.
- When installing, tighten the screws evenly, in a crisscross pattern, using the torque recommended for the specific connection.
Frequently Asked Questions
Does the AF-1000 panel contain asbestos?
No. Gambit AF-1000 is an asbestos-free material that complies with applicable regulations.
What thickness of gasket sheet should I choose?
Thinner sheets (0.3–1 mm) work well on smooth, rigid surfaces, while thicker ones (1.5–4 mm) better fill in unevenness and compensate for flange deformation. The easiest way is to measure your old gasket.
Need a different size or thickness?
We offer additional sizes and thicknesses of this material—and if you can’t find the size you need, write to us, and we’ll check if we can cut it to size.
The specified limit values (temperature, pressure) do not occur simultaneously and are for reference only. The selection of material for a specific application should be verified against the manufacturer’s technical data sheet.
Gambit AF-1000 gasket sheet, 2 mm thick, dimensions 500×1250 mm – asbestos-free aramid sheet for cutting your own flat gaskets. Suitable for use up to 350°C. Ideal for exhaust and manifold gaskets.
| Safety information | Material for making gaskets. Check that it is suitable for the operating conditions (temperature, pressure, medium). Cut carefully using a sharp tool. Wear gloves and safety goggles; wear a dust mask if dust is generated. Beware of sharp edges. Store in a |
|---|---|
| Manufacturer’s code | AF-1000 |
| Record label | Gambit |
| Album genre | AF-1000 |
| Thickness (mm) | 2 |
| Width (mm) | 500 |
| Length (mm) | 1250 |
| Max. temperature (°C) | 350 |
